product datasheet saga series last update 24/9/2013 ordering number family type led color diameter height style optic material holder material fastening status CN13990_saga-hb-ip-wht saga assembly vero10 white 50 mm 12 mm round silicone pc screw on production fwhm efficiency cd/lm gerber file 58 degrees 92 % 0.850 available note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. october 2nd 2013 9:47 copyright ledil oy - subject to change without prior notice - page 1/2 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet saga series last update 24/9/2013 general information - product series especially designed & optimized for vero10 series of leds. - special care taken to make light distribution as uniform as possible. - optic holder molded by high quality pc material (120 dergees of celcius / 248 degrees of fahrenheit). october 2nd 2013 9:47 copyright ledil oy - subject to change without prior notice - page 2/2 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 a h b g d e c f b g a h 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class f, otherwise class m. according to din iso 2768-2 form and position: class k scale 2:1 weight sheet 1/1 size a3 drawing title CN13990_saga-hb-ip-wht part number CN13990 ledil oy salorankatu 10 fin 24240 salo finland third angle projection: this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy." - front view scale: 2:1 12 50 top view scale: 2:1 led position bottom view scale: 2:1 35 c/c 3.2 isometric view scale: 1:1 lens holder
product datasheet saga series last update 24/9/2013 ordering number family type led color diameter height style optic material holder material fastening status CN13990_saga-hb-ip-wht saga assembly vero10 white 50 mm 12 mm round silicone pc screw on production fwhm efficiency cd/lm gerber file 58 degrees 92 % 0.850 available note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. october 2nd 2013 9:47 copyright ledil oy - subject to change without prior notice - page 1/2 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet saga series last update 24/9/2013 general information - product series especially designed & optimized for vero10 series of leds. - special care taken to make light distribution as uniform as possible. - optic holder molded by high quality pc material (120 dergees of celcius / 248 degrees of fahrenheit). october 2nd 2013 9:47 copyright ledil oy - subject to change without prior notice - page 2/2 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 a h b g d e c f b g a h 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class f, otherwise class m. according to din iso 2768-2 form and position: class k scale 2:1 weight sheet 1/1 size a3 drawing title CN13990_saga-hb-ip-wht part number CN13990 ledil oy salorankatu 10 fin 24240 salo finland third angle projection: this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy." - front view scale: 2:1 12 50 top view scale: 2:1 led position bottom view scale: 2:1 35 c/c 3.2 isometric view scale: 1:1 lens holder
product datasheet saga series last update 24/9/2013 ordering number family type led color diameter height style optic material holder material fastening status CN13990_saga-hb-ip-wht saga assembly vero10 white 50 mm 12 mm round silicone pc screw on production fwhm efficiency cd/lm gerber file 58 degrees 92 % 0.850 available note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. october 2nd 2013 9:47 copyright ledil oy - subject to change without prior notice - page 1/2 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet saga series last update 24/9/2013 general information - product series especially designed & optimized for vero10 series of leds. - special care taken to make light distribution as uniform as possible. - optic holder molded by high quality pc material (120 dergees of celcius / 248 degrees of fahrenheit). october 2nd 2013 9:47 copyright ledil oy - subject to change without prior notice - page 2/2 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 a h b g d e c f b g a h 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class f, otherwise class m. according to din iso 2768-2 form and position: class k scale 2:1 weight sheet 1/1 size a3 drawing title CN13990_saga-hb-ip-wht part number CN13990 ledil oy salorankatu 10 fin 24240 salo finland third angle projection: this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy." - front view scale: 2:1 12 50 top view scale: 2:1 led position bottom view scale: 2:1 35 c/c 3.2 isometric view scale: 1:1 lens holder
product datasheet saga series last update 24/9/2013 ordering number family type led color diameter height style optic material holder material fastening status CN13990_saga-hb-ip-wht saga assembly vero10 white 50 mm 12 mm round silicone pc screw on production fwhm efficiency cd/lm gerber file 58 degrees 92 % 0.850 available note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. october 2nd 2013 9:47 copyright ledil oy - subject to change without prior notice - page 1/2 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet saga series last update 24/9/2013 general information - product series especially designed & optimized for vero10 series of leds. - special care taken to make light distribution as uniform as possible. - optic holder molded by high quality pc material (120 dergees of celcius / 248 degrees of fahrenheit). october 2nd 2013 9:47 copyright ledil oy - subject to change without prior notice - page 2/2 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 a h b g d e c f b g a h 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class f, otherwise class m. according to din iso 2768-2 form and position: class k scale 2:1 weight sheet 1/1 size a3 drawing title CN13990_saga-hb-ip-wht part number CN13990 ledil oy salorankatu 10 fin 24240 salo finland third angle projection: this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy." - front view scale: 2:1 12 50 top view scale: 2:1 led position bottom view scale: 2:1 35 c/c 3.2 isometric view scale: 1:1 lens holder
product datasheet saga series last update 24/9/2013 ordering number family type led color diameter height style optic material holder material fastening status CN13990_saga-hb-ip-wht saga assembly vero10 white 50 mm 12 mm round silicone pc screw on production fwhm efficiency cd/lm gerber file 58 degrees 92 % 0.850 available note: the typical divergence will be changed by different color, chip size and chip position tolerance. the typical total divergence is the full angle measured where the luminous intensity is half of the peak value. october 2nd 2013 9:47 copyright ledil oy - subject to change without prior notice - page 1/2 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 product datasheet saga series last update 24/9/2013 general information - product series especially designed & optimized for vero10 series of leds. - special care taken to make light distribution as uniform as possible. - optic holder molded by high quality pc material (120 dergees of celcius / 248 degrees of fahrenheit). october 2nd 2013 9:47 copyright ledil oy - subject to change without prior notice - page 2/2 ledil oy salorankatu 10 24240 salo finland http://www.ledil.com email: ledil@ledil.com fax: +358-2-733 8001 a h b g d e c f b g a h 3 3 2 2 4 4 1 1 tolerances if not otherwise shown according to din iso 2768-1 linear measures: up to 30mm class f, otherwise class m. according to din iso 2768-2 form and position: class k scale 2:1 weight sheet 1/1 size a3 drawing title CN13990_saga-hb-ip-wht part number CN13990 ledil oy salorankatu 10 fin 24240 salo finland third angle projection: this drawing is the property of ledil oy. it may not be reproduced, copied or communicated without a written agreement with ledil oy." - front view scale: 2:1 12 50 top view scale: 2:1 led position bottom view scale: 2:1 35 c/c 3.2 isometric view scale: 1:1 lens holder
|
